PTA & Mobile Registration

How to Check Both IMEIs on a Dual-SIM Phone

On this page
  1. Why a phone can show two different IMEI numbers
  2. Find IMEI 1 and IMEI 2 without exposing them
  3. Send a separate PTA verification query for each IMEI
  4. What if the statuses disagree?
  5. eSIM and dual-SIM questions that can mislead buyers
  6. A two-minute checklist before switching slots or buying

To check both IMEIs on a dual-SIM phone, dial *#06#, write down every IMEI displayed, and verify each identifier separately through an official PTA device verification channel, including the documented SMS service at 8484. Do not assume that a compliant reply for IMEI 1 automatically covers IMEI 2. This is particularly important when buying a used phone, changing SIM slots or setting up an eSIM in Pakistan. A phone’s number of physical SIM trays does not always tell you how many identifiers it has.

Why a phone can show two different IMEI numbers

IMEI stands for International Mobile Equipment Identity. It identifies mobile-network equipment or a radio subscription capability for device-recognition purposes; it is not your SIM number, phone number or password. On many dual-SIM phones, the system displays IMEI 1 and IMEI 2. A phone with one physical SIM and one eSIM option may also have two, while the presentation can differ by manufacturer and model.

A SIM card identifies your subscription, whereas an IMEI identifies the relevant device capability. Changing a SIM normally changes which subscription is active, not the phone’s underlying IMEI. Avoid equating the two SIM slots to two separate handset registrations without checking the device and the official result. Our fact-checking policy makes clear that individual PTA status is separate from a model listing.

PTA’s DIRBS device-verification procedure describes checks against the device IMEI and documents SMS verification through 8484. Use the current official PTA system for the actual status rather than informal WhatsApp screenshots or a shop’s printed list.

Find IMEI 1 and IMEI 2 without exposing them

  1. Unlock the phone and open its standard dialer app.
  2. Enter *#06#. The IMEI identifiers generally appear automatically; the presentation varies by model.
  3. Look for labels such as IMEI 1, IMEI 2, Primary or Secondary. Note the whole number for each, taking care not to transpose digits.
  4. If the screen shows only one IMEI, inspect Settings > About phone or the manufacturer-designated device-information section before assuming there is no second identifier.
  5. Compare the values with available packaging or invoice information. Keep the complete numbers private; don’t share publicly searchable screenshots.

On an iPhone, the identifier details can also be found in Settings > General > About, although the fields displayed depend on the model and installed SIM/eSIM capabilities. Android labels vary among Samsung One UI, Xiaomi HyperOS, Oppo ColorOS, Vivo and other manufacturers. If your phone has no conventional dialer, consult its official device documentation for the correct method.

Two parallel conceptual flows from IMEI 1 and IMEI 2 through SMS 8484 to individual results
Instructional diagram showing why dual-SIM phones require two separate IMEI queries.

Send a separate PTA verification query for each IMEI

From a working Pakistan SIM, compose a message containing only IMEI 1 and send it to 8484. Wait for the official status reply and note it. Then create a new message containing IMEI 2 and repeat. You can also use the current official Device Verification System method where available. Some operator charges or service conditions may apply; do not assume every request is completely free.

Read the exact words. A response describing an IMEI as valid is not always the same as a reply saying it is PTA compliant or approved. Likewise, a reply indicating a non-compliant, duplicate, stolen or blocked condition deserves further investigation before a purchase or long-term use. The FBR DIRBS information page is a useful official gateway when registration or customs duties need attention.

How to interpret two IMEI checks together
IMEI 1 responseIMEI 2 responsePractical next step
CompliantCompliantSave both replies; still check ownership and connectivity
CompliantValid but unregisteredDo not call the full dual-SIM phone fully approved
CompliantNon-compliant/blockedStop and seek official clarification before purchase
Valid but unregisteredValid but unregisteredCheck official registration requirements and cost
Unexpected mismatchAny statusRecheck the digits and ask seller for clear documentation

This is a decision aid, not an attempt to reproduce the official wording of every possible PTA message. The status vocabulary and applicable rules can change. Only the reply generated for the actual handset identifiers establishes what the system currently reports.

What if the statuses disagree?

First verify that you copied both numbers correctly and did not accidentally check a serial number, EID or SIM ICCID. Next repeat the query through another official PTA-supported method if available. Do not assume that a working call on SIM 1 proves SIM 2 will remain usable on a local network. A phone may be technically capable of dual SIM while its individual identifiers have different compliance histories.

If the seller claims an earlier payment covered both identifiers, ask for evidence identifying the handset and seek clarification through official channels. Do not pay a third party to ‘fix’ or rewrite the IMEI. Modifying identifiers can create legal and security risks, and an altered number is not legitimate proof of device registration.

When researching a phone variant, compare specifications through the MobileFone device directory, but remember that a listing describes a model, not the regulatory status of two specific IMEIs.

Concept comparison cards for IMEI, ICCID, EID and serial identifiers
Diagram distinguishing equipment identity from SIM and manufacturer identifiers.

eSIM and dual-SIM questions that can mislead buyers

An eSIM is a digital subscriber identity supported by certain devices and operators; it does not make the phone exempt from IMEI verification. Depending on the hardware, the identifiers displayed can relate to different radio paths or supported subscriptions. Do not assume an iPhone with one physical SIM slot must have only one IMEI, or that two physical tray openings guarantee two valid network identities.

An EID is an identifier associated with the embedded SIM component. It is not a replacement for checking a device IMEI with PTA. The same applies to an ICCID, which identifies a SIM profile or card, and to the serial number printed by the manufacturer. Entering the wrong kind of number may produce a useless or confusing verification result.

A two-minute checklist before switching slots or buying

  • Find every actual IMEI on the handset itself.
  • Submit each IMEI separately and read the full official status.
  • Check the numbers against packaging or documentary evidence, while allowing for legitimate differences in labeling.
  • Test calls, texts and data on the intended SIM arrangement where possible.
  • Resolve any unmatched or unregistered identifier through official sources before making a firm purchase commitment.

Keep the result for both identifiers together. The important distinction is straightforward: dual-SIM support is a hardware feature; PTA compliance is a status that must be verified for the relevant identifiers.

Muhammad Nawaz is a graduate in IT from Faisalabad IT College and currently works at mobilefone.pk, where he contributes his expertise on the latest in mobile and technology trends.

View author profile

Leave a Comment